Sublimation messenger bag / PURSE Shoulder bag(multiple variants)

Sublimation messenger bag made of High Quality material. These bags are Sublimation-ready for a customized print. The whole white flap of the bag is Sublimation-ready. The Sublimation Flap is also detachable for easy sublimation.

Features

Durable and Tear-Resistant
With Zipper
Water-Resistant
Detachable Flap
Available in 3 Sizes
High Quality
Specifications

Color: Black

Dimensions ( cm ):
Small: ~ 21 x 22 approx.
Medium: ~ 18x31 approx.
large:~ 42x29.5 approx.

Sublimation Guide:
Temp: ~ 385 degrees
Time: ~ 60 secs

SHOULDER BAG SUBLIMATION

Supplies needed:
- sublimatable substrate (shoulder bag)
- sublimation transfer
-scratch paper/ parchment paper/butcher paper
- heat tape
- soft paper towel Nomex or felt pad

Heat press settings:
- temperature - 390 degrees F
- dwell time - 1:00 to 1:15 minutes
- pressure - medium (firm)

Note: The recommended settings above may need adjustments for best results.
Settings will vary depending on the heat press brand and model ink and paper
and atmospheric conditions.

2nd Note: The layers of soft paper towel Nomex pad or felt pad helps to
distribute the pressure evenly throughout the substrate.

3rd Note: To adhere the transfer to the substrate use heat tape.

Layer the press from the bottom pad to the top heat platen as follows:
1. scratch paper/ parchment paper/butcher paper
2. 4-5 layers of soft paper towel Nomex pad or felt pad
3. substrate
4. transfer
5. scratch paper

Steps:
1. Spray the transfer with repositionable spray.
2. Remove the sublimatable flap from the bag.
2. Position the flap onto the transfer.
3. Leaving the buttons of the flap outside of the press place the transfer
and substrate in the press onto the soft paper towel Nomex pad or felt pad.
4.scratch paper/ parchment paper/butcher paper over your substrate.
5. Press the items using the settings listed above.
6. Remove the transfer from the substrate and items from the press
immediately. Use heat resistant gloves if necessary - the items will be very
hot.

Tips:
- If the image of the final product appears light increase the pressure or
the dwell time slightly (10-20 seconds).
- If the image on the final product appears blurred or substrate appears
yellowed reduce the dwell time slightly (10-20 seconds).

Features

Downloads